Tile & Grout Cleaning/Sealing

Ceramic tile is one of the most abused and overlooked floor and wall surfaces in our homes simply because of the care involved in cleaning it. No one loves to scrub tile and grout on their knees with irritating, harsh, and unsafe chemicals! Fortunately, we have a safe and effective 8 step cleaning process to help you eliminate that chore in your life.

Carpet Tech uses pure softened water powered by 800+ PSI and heated to 200+ Degrees to literally pressure wash your tile with a self-contained tool. We use state of the art tools such as the SX-12 for larger areas and a Gecko hand held for the more intricate areas. With our advanced products and systems for cleaning tile and grout, your floors will look very much the way they did when they were new.


We are dedicated to helping you keep your home healthy, clean, and always looking its best. The solution to difficult ceramic tile and grout cleaning is just a phone call away.

Call or Text Us

We are here to answer your questions or to schedule a FREE cleaning estimate.


1. Pre-Inspection:

Technicians will inspect the tile and grout and walk you through any challenging areas, as well as set your expectations and come up with a solution for each area.

2. Area Preparation:

We will prepare the areas surrounding the tile, making sure not to disturb any carpeted or hardwood floors. At this point all furniture that we will be cleaning under is moved off of the tile.

3. Dry soil removal:

Our technicians thoroughly sweep and vacuum the entire area as needed, maximizing the results we obtain. As in any cleaning process, dry soil removal is very important.

4. Pre-Spray:

We use high powered pre-sprays that break down soils and grease upon contact.

5. Agitation:

All grout lines are agitated manually with a grout brush and all tiled areas are agitated with a mechanical rotating brush. This step suspends the soil and prepares the floor to be cleaned.

6. Clean and Rinse:

The entire floor is then cleaned using a state of the art self-contained pressure cleaning system known as the SX-12. All corners and intricate spots will be cleaned with a hand held tool. All wet corners and puddles will be wiped up and dried. A rinse solution is pumped through the machine during the cleaning process. This rinse sanitizes and balances the pH of your floor.

7. Sealing/Finishing & Grout Dying:

The type of sealer and application varies on what surface it is being applied to. GROUT DYING- Some grout may be colored if desired. Ask your technician about any sealing or dying options.

8. Post-inspection:

The Technician will walk through the job with you and go over all the results to ensure that you are 100% satisfied.

Carpet Tech Services
3050 S. Country Club Drive, Suite 6
Mesa, AZ 85210
(602) 350-4083

Service Areas
Phoenix/Ahwatukee, Scottsdale, Paradise Valley, Tempe, Mesa, Chandler, Gilbert, Fountain Hills, Gold Canyon, Queen Creek, Cave Creek, Apache Junction, San Tan Valley, Sun Lakes and MORE

Copyright © 2020 Carpet Tech Services
All rights reserved | Privacy Policy

Site Design by Modern Yellow®